Jump to content

Reviving a rusted Arisaka bayonet scabbard & hilt


Bob Hudson
 Share

Recommended Posts

I recently got an Arisaka bayonet with a beautiful blade but rather rusty elsewhere, especially on the scabbard and pommel.

 

I cleaned it with a technique I've used dozens of time to remove active rust without harming the underlying surface.

 

I liken it to wet sanding during varnishing, using a nylon pad and WD-40 to keep everything soaking wet. I also use brass brushes including rotory brushes in a Dremel-stype tool. This is not a process that shines your blade: It's very low impact and I've found that the nylon and brass only removes the loose rust. Never once has anything happened where I said "Oops!" .

 

But - as happened with the bayonet shown in this video - I have often found surprises hidden behind the rust.

 

Link to comment
Share on other sites

  • 3 years later...

Nice Job.

 

I use "Break-Free" CLP, Cleaner Lubricant and Preservative, gun cleaner.  It was designed for firearms, so I've always assumed it's safe for my blades. 

 

The great thing about break-free is, just apply a nice heavy coat and let the item sit. After a day or two, most of the dirt and rust will just wipe away from the item.  Then, just a nylon brush, brass brush and rifle cleaning patches.  When I complete the cleaning, I usually put a light coat of break-free on the blade. 

Link to comment
Share on other sites

Preppy Picker
On 4/27/2019 at 8:39 PM, Bob Hudson said:

I recently got an Arisaka bayonet with a beautiful blade but rather rusty elsewhere, especially on the scabbard and pommel.

 

I cleaned it with a technique I've used dozens of time to remove active rust without harming the underlying surface.

 

I liken it to wet sanding during varnishing, using a nylon pad and WD-40 to keep everything soaking wet. I also use brass brushes including rotory brushes in a Dremel-stype tool. This is not a process that shines your blade: It's very low impact and I've found that the nylon and brass only removes the loose rust. Never once has anything happened where I said "Oops!" .

 

But - as happened with the bayonet shown in this video - I have often found surprises hidden behind the rust.

 

 

Love your video Bob!!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...